The classic 409®, which has proven its worth millions of times over, has been optimised in terms of its design and stored in a magazine; the further development is being sold under the name 409®-2.
In order to simplify the handling of the clip for roofers, FOS offers the 409®-2 collated on plastic strips. Each strip contains 25 clips and is suitable for the FOS ClipHOLSTER®. The magazine clip storage on plastic strips enables swift individual clip removal and reduces the risk of injury as well.
On the roof the use of the ClipHOLSTER accelerates the installation considerably. Because the ClipHOLSTER is fastened to the belt, the clips are within easy reach. The roofer has his hands free and can therefore work more efficiently. Empty magazine strips can be replaced quickly and conveniently. In practical tests, time savings of up to 25 % were recorded. Note: When mounting 409®-2 strips, the red protective cover can be used.
The design of the previous model has been optimised in a number of ways. The FOS quality seal can be found on the clip’s hook. Even after decades, the imprinting of the logo provides proof that you are using a high-quality brand product.
To simplify hammering in of the clip, in the case of the round 409®-2, the round hook enables lateral turning away from the side lock. In the case of the angular 409®-2, an angle produces this effect with an offset of approximately 1 cm from the side lock.
Unlike the 409®, the 409®-2 is available in five different tip lengths as opposed to four: 42 mm, 52 mm, 62 mm, 72 mm and 82 mm. This results in a better ratio between the tip length and the penetration depth in the batten and therefore between the tip length and the roof tile. All of the roof tiles’ assignments to the new lengths were checked and specified. With the FOS ClipCHECK® product finder, they can be quickly determined by specifying the area of application, the installation type, the roof tile and the batten.
On the impact tip, an additional collar clearly indicates the minimum depth to which the clip must be hammered in. The new embossed grooved section on the impact tip increases the clip’s pull-out resistance from the wood.